INFORMATION!
It is possible to change your INVENTORY MANAGEMENT once it has been used. However it is
important to know that:
•
When you change to the EXACT management system, all current positioned bottles will get
an UNPLACED state. Do you really want to change the INVENTORY MANAGEMENT system
to EXACT?
•
When you change to the GENERIC management system all NOTES will be deleted and bottles
will get a generic position on the current shelf. Do you really want to change the INVENTORY
MANAGEMENT system to GENERIC?
Scan Wine Label
Use the camera scanner to automatically recognize a wine label from Vivino database to later on
manage your Inventory. If the wine is found all data from the wine will be filled in automatically. If
not, it is possible to enter wine data manually.
From opened plus menu, tap on the
SCAN WINE LABEL function to start
scanning a wine label. To be able to use
the camera, it is needed to enable the
camera. This can be done during Initial
Use or in Settings.
1.
Center the wine label in front of the
camera. When you are ready tap on the
‘Camera’ icon to activate the camera.
2.
Take a picture. When icon is pressed, a
picture is taken automatically.
01.
Take a picture with 5 seconds
countdown. After the countdown a
picture is taken automatically.
02.
Manually input wine data. If you prefer
to insert yourself the wine data.
03.
The camera feedback is mirrored to make it
easier to fit the lable in the frame.
If the resulting picture is good press the
‘Confirm’ key. Otherwise, tap on the ‘Try
again’ icon.
3.
49
Operation
