Changing the basic appliance configuration
The basic appliance configuration can be adjusted to suit your preferences.
This can be done without using any tools.
WARNING!
Disconnect the appliance from the power mains before changing the appliance configuration!
In order to avoid damaging the floor, use a floor mat or other suitable protection on the floor in
front of the appliance.
Take care not to damage the door gasket. A damaged gasket will negatively affect appliance
operation.
Remove the following serving set elements in the indicated order: vertical bottle holder, serving tray,
and inclination serving bottle shelf with accessory drawer. The process of removing each serving
set element is described in the chapter Zone B - serving area.
Up to 51 Bordeaux bottles can be loaded onto
the bottom insulation barrier.
With such configuration, a total of 190
Bordeaux bottles can be stored in the
appliance.
The number of bottles you can place onto each
shelf is indicated on the drawing.
It is however recommended to buy the
accessory set with three additional shelves
(see next page).
32
Description of the appliance
