18
Washing
7
Close the washer door and
press the Start/Stop button
Time remaining
The time remaining is shown in hours and
minutes. Once a programme is selected, the
estimated programme time is displayed. This
may differ from time to time depending on the
temperature of the water entering the machine
and the size of the load.
If the programme time is longer than the
previous wash with the same programme,
"0:01" will be displayed until the programme
finishes. This is normal! The next time you
use the programme under similar conditions,
the estimated programme time will be more
accurate.
To add or remove washing after the
program starts
If you want to add or remove items after the
programme has started, you can stop the
programme by pressing and holding the Door
opening button (key symbol) for three seconds.
When you restart the machine, add any extra
detergent needed and close the washer door.
The machine continues automatically from the
point where the programme was interrupted.
Stopping or changing a programme
You can stop a programme by pressing the
Start/Stop button for three seconds. "Stop"
appears in the display. To restart the machine,
select a new programme, add any extra
detergent needed and press the Start/Stop
button.
NOTE!
Do not open the detergent compartment while
the machine is running.
8
Once the program has finished
The text "Done" is shown on the display.
The washer door opens automatically
once the programme has finished. If you want to
deactivate the automatic door opening function,
see the "Selecting settings" section.
• Remove the load.
• Turn off the main power switch, this will save
energy.
If you have small children or pets at home, close
the washer door once you have removed the
laundry.
Backlighting
Two minutes after the wash programme finishes
the display backlighting enters energy saving
mode. Turn the programme selector if you want
to activate the machine.
NOTE!
Upon completion of the washing cycle, close the
water faucet and unplug the mains cord.
