Disturbances from the environment (e.g. the power grid) may result in various error reports (see
Troubleshooting table). In such case:
•
Switch off the appliance, wait for 1 minute, switch the appliance back on, and repeat the drying
program.
•
If the error persists, call an authorized service center.
•
You will be able to solve most of the
problems
in appliance operation by yourself (see below
Troubleshooting table ).
•
Repairs
may only be carried out by an adequately trained person.
•
Repair or any warranty claim resulting from incorrect connection or use of the dryer shall not be
covered by the warranty. In such cases, the costs of repair shall be charged to the user.
INFORMATION!
The warranty does not cover the errors or failures resulting from disturbances from the environment
(lightning strike, power grid failures, natural disasters etc.).
What to do?
Cause
Problem/error
The machine
will not start.
•
•
Check whether the main switch is on.
The main switch is not switched
on.
•
Check the fuse.
•
There is no voltage in the power
outlet.
•
Check if the power cord plug is correctly
inserted into the power outlet.
There is
voltage in the
•
•
Re-read the instructions for use again.
Program was not started in
accordance with the instructions.
outlet, but the
drum does not
spin ...
•
•
Check if the door is closed properly.
Door might be open.
The dryer
does not work.
•
•
Empty the condensate tank (see section
"CLEANING AND MAINTENANCE") (only
The condensate tank is full (only
applies to condensation dryer
and the dryer with a heat pump).
applies to condensation dryer and the
dryer with a heat pump).
•
•
To cancel the Delayed Start option,
press 5 the Skip button.
Delayed start might be activated.
The machine
stops
•
Clean the door net filter (see chapter
"CLEANING AND MAINTENANCE").
•
The door net filter may be
clogged. As a result, the
temperature in the dryer rises,
operating
•
Wait for the machine to cool down, and
try running it again. If the dryer still fails
to start, call service centre.
which in turn causes
overheating, and the dryer
switches off.
completely
during a
program.
40
Errors – what to do?
