Asko PROFESSIONAL TDC111VG, Руководство по эксплуатации

Страница: 15 / 28

15
Troubleshooting
The machine will not start
Check
• that the door is properly closed.
• that the main power switch is on.
• that the plug is connected.
• that the main fuses have not blown.
• that the overheating cut-out has not been
triggered.
The machine loses all power during a
programme
The overheating cut-out shuts o ff the tumble
dryer if the temperature is too high, e.g.
because dust is clogging the lint fi lter.
• Clean the lint fi lter.
• Wait until the machine has cooled then try
starting it. If it still does not start: Call the
service division.
Drying takes too long
• Check that the lint fi lter is not blocked. See
the Care and cleaning chapter.
Error messages
• Read Drying takes too long in this chapter if
Max program time appears on the display.
• If Clean Lint Filter appears on the display,
clean the lint fi lter.
• Call the service division if Thermistor fault
appears on the display.
• Press the Stop button to close any error
messages.