Asko OP8640, Инструкция по эксплуатации, Страница: 23 / 28

21
If necessary, remove the door’s inner
glass assembly. This assembly is
composed of one or two sheets of
glass (depending on model), each of which
has a black rubber corner pad.
After cleaning, reposition the four
rubber pads, taking care to follow the
indications on the glass:
* top left: L
* top right: R
Place your inner glass assembly in
the door so that L and R are located
on the hinge side.
- If your oven is equipped with a single
inner sheet of glass, it must be located as
close as possible to the clipped glass.
Clip in your last glass sheet by
placing the indication “PYROLYSIS”
so that it faces you.
Remove the red plastic stops.
Your appliance is again operational.
Warning
Before beginning pyrolysis, remove all
the accessories inside the oven,
including all cookware.
Before beginning pyrolysis, clean any
major spill residue that may have
occurred to avoid the risk of a fire or
the production of excessive smoke.
- During pyrolysis, the surfaces
become hotter than during normal use;
children must be kept away.
- Do not cover the interior of the oven
with aluminium foil. This would
damage the enamel on the oven
cavity..
The door effectively locks a few
minutes after the start of the cycle.
Pyrolysis stops automatically. When
the temperature reaches approximately
275°C, it is then possible to open the
door.
8
7
6
5
4
The Cleaning function
CLAC
CLAC
L
R