Asko HIG1995AD, Руководство по эксплуатации

Страница: 25 / 45

Enable connecting Bridge Induction zones
1. Place a large pan on both cooking zones so that both zones are
well covered.
2. Switch on the front cooking zone.
3. Hold two keys down at the same time (for a few seconds): the <<
button on the rear Bridge Induction zone and the >> button on the
front Bridge Induction zone.
‘br’ will appear in the display of the rear zone. The rear zone can
no longer be controlled. Both zones are heated according to the
setting set in the front cooking zone.
4. Set the desired cooking level using the + or - button, or the << or
>> button of the front zone. Both zones are heated in the level set.
Disable connecting Bridge Induction zones
Hold two keys down at the same time (for a few seconds): the << button on the rear Bridge Induction
zone and the >> button on the front Bridge Induction zone.
The zones are not connected anymore. The rear cooking zone display dims and setting 1 appears
in the front cooking zone display.
Or:
Press the on/off button of the front cooking zone to switch off both cooking zones.
You will hear a single audio signal and the display dims. The cooking zone has been switched off
completely.
Turning off
Switching off one cooking zone
Press the on/off button of the cooking zone you want to switch off.
You will hear a single audio signal and the slider dims.
• If all cooking zones have been switched off in this way, the hob will automatically be in the
standby mode (also refer to ‘standby mode’).
Switching off all cooking zones
Press the key button briefly to switch off all the cooking zones at the same time.
A single audio signal sounds. The red light next to the key button will flash slowly.
• The hob is now in eco standby mode (see also ‘eco standby mode’).
Automatic cooking programs
Each induction zone is equipped with 6 automatic cooking programs. You can set any end time of
an automatic cooking program with the aid of the kitchen timer function.
The cooking programs are based on regular quantities.
These menu functions work best if they are started at the beginning of the cooking process.
25
Induction operation