Asko HI16556, Инструкция по эксплуатации

Страница: 31 / 36

EN 31
Symptom Possible cause Solution
The hob is not working
and nothing appears in the
display. There is no power supply
due to a defective cable or a
faulty connection. Check the fuses or the
electric switch (if there is no
plug).
A fuse blows as soon as the
hob is switched on. The hob has been wrongly
connected. Check the electrical
connections.
‘br’ appears in the display
and the touch controls are
not working.
The bridge function is
activated.
Deactivate the bridge function
(see pagina 17).
Error code F00.
The control panel is dirty or
has water lying on it. Clean the control panel.
Error code F0 up to and
including F6 and FC.
Defective generator. Contact the service
department.
Error code F7.
The ambient temperature is
not good. Switch off all heat sources in
the vicinity of the cooking plate.
Error code F8 and F08.
Appliance over heated. The appliance has been
switched off because of over
heating. Let the appliance
cool down and start again on
a lower setting.
Error code F9 and/or
continuous beep.
The appliance has been
connected incorrectly and/or
the mains voltage is too high. Let your connection be
changed.
Error code F99.
You have pressed two or more
buttons at the same time. Do not operate more than one
button at the same time.
Error code FA.
Mains voltage is too low. Contact your energy supplier.
Error code FAN.
Air circulation not good. Make sure the venting holes
under the cooking plate are
open.
Other error codes.
Defective generator. Contact the service
department.
TROUBLESHOOTING