Asko HI1194G, Инструкция по эксплуатации

Страница: 15 / 36

EN 15
OPERATION
Switching on bridge function
1. Place the large pan on both cooking zones so that these are both
well covered.
2. Switch the front cooking zone on.
3. Press on the bridge function key of the front slide control for two
seconds in order to set the status 'bridge'.
‘BR’ will appear in the display on the rear zone. The rear zone can
no longer be used.
4. Slide with your finger over the front slide control (clockwise) or tap
with your finger on the slide control to set the desired setting. Both
zones are heated to the level set.
Switching off bridge function
1. Press on the bridge function key of the front slide control for two
seconds in order to switch off the status 'bridge'.
The bridge function is switched off, the rear display goes off,
level 1 is present in the front display.
Or:
2. Press on the on/off button of the front cooking zone in order to
switch both zones off.
You will hear a signal and the level in the display disappears. The
cooking zone has been switched off completely.
Switching off
Switching off one cooking zone
Press the on/off button of the cooking zone you want to switch off.
You will hear a single signal and the slider goes off.
• If all cooking zones have been switched off in this way, the hob
will automatically be in the stand-by mode (also refer to ‘stand-by
mode’).
Switching off all cooking zones
Press key button to switch off all the cooking zones at the same time.
A single beep will be heard. The red childproof lock indicator next to the
button will blink very slowly.
• The induction hob is now in eco stand-by mode (see also ‘eco
stand-by mode’).