Asko HI1194G, Инструкция по эксплуатации

Страница: 14 / 36

EN 14
Switching on boost
1. Put a pan on a cooking zone and switch the cooking zone on.
2. Tap twice with your finger at the end of the slide control to set the
‘boost’ setting.
Level 12 and ‘boost’ appear in the display.
Switching off ‘boost’
‘Boost’ has been switched on, the display shows level 12 and ‘boost’.
1. Tap any part of the slider with your finger.
In the display you will see a lower level.
Or:
2. Press the on/off button of the cooking zone you want to switch off.
You will hear a signal and the level in the display disappears. The
cooking zone has been switched off completely.
Two cooking zones one in front of the other
• Two cooking zones one in front of the other affect each other. When
both of these cooking zones are switched on at the same time, the
power is automatically shared between them. The first set cooking
zone will remain at the set setting at all times. The maximum set
setting for the cooking zones to the front or back that is added later,
depends on the setting of the first cooking zone. When you have
reached the maximum amount of cooking setting combinations, the
last set setting will start to flash and is automatically lowered to the
highest possible setting.
• Two cooking zones alongside each other have no effect on each
other.
You can set both cooking zones on a high setting.
• If the vario zones are bridged, they cannot be set to boost and the
menu functions cannot be used.
Bridging of the Vario induction zones (HI1694G and HI1994G)
The Vario induction zones can be bridged (linked) to each other. This
creates 1 large zone that can be used for a large fish pan for example.
• If the vario zones are bridged, they cannot be set to boost and the
menu functions cannot be used.
Use a (fish) pan where at least one of the centre/middle positions of the
vario zones is covered.
OPERATION