Action
Possible causes
Problem
Activate the Auto Open setting.
The Auto Open setting has not
been activated.
The dishes are not dry enough.
Fully load the dishwasher.
The dishwasher is not fully
loaded.
Top up with rinse aid or increase
the rinse aid dosage level. See
the chapter Settings.
Rinse aid needs topping up or
dosage is set too low.
Switch all-in-one detergents or
deactivate the setting TAB and
top up with salt and separate
rinse aid. See Rinse aid in the
chapter Settings.
The setting TAB is activated and
all-in-one detergent with
insufficient drying effect is being
used.
Open the door a little once the
program has finished.
Table continued from last page
38
Troubleshooting
