background image

Page 7

Drying

This lets you select how long the turbo fan runs after
the final rinse. You have three options: Short, Economy
or Normal drying. (

Note: This option is not available

with the Pots & Pans and Rinse and Hold programs.)
To set the drying time, press Menu until “Drying”
displays, then press Set until your preference displays.

Express

This option reduces the wash time and lowers the wash
temperature by 20° F. (

Note: This option is not available

with the Quick Wash, Pots & Pans and Rinse and Hold
programs.)  Press Menu until Express displays, then
press Set once to select On or twice to select Off. Press
Menu to confirm your selection.

Super rinse

The Super rinse option adds two extra rinses.  This
gives an even better rinsing result. The Super rinse
option can be used in all programs except  the Quick
wash and Rinse and Hold programs. Press Menu until
Super rinse displays, then press Set once to select On
or twice to select Off. Press Menu to confirm your
selection.

Cool Touch

This option lets you set a cool-down cycle after the drying
program (in all programs except Rinse and Hold). Press
Menu until Cool Touch displays, then press Set once to
select On or twice to select Off. Press Menu to confirm
your selection.

POWER BUTTON

POWER BUTTON

POWER BUTTON

POWER BUTTON

POWER BUTTON

Use this button to turn the main power to the unit on
and off.  The location of the power button is illustrated
on page 6.

ST

ST

ST

ST

STAR

AR

AR

AR

ART/ST

T/ST

T/ST

T/ST

T/STOP BUTT

OP BUTT

OP BUTT

OP BUTT

OP BUTTON

ON

ON

ON

ON

Once you have selected the wash program and options,
press this button to start the dishwasher. (Make sure
the door is securely closed.)

F

FF

FFA

A

A

A

AUL

UL

UL

UL

ULT CODES

T CODES

T CODES

T CODES

T CODES

In the event that the machine should fail during a
program, the display window will show a fault code. The
table below defines these codes and gives possible
causes and solutions. See also “Troubleshooting” on
page 13.

Display

Type of Fault and Recommended Action

Overfilling

Too much water has entered the dishwasher. Call a service technician.

Water Inlet Fault

Water inlet fault. Make sure the water supply is open.

Inlet Valve Leakage

Valve leakage. Shut off the water supply and contact a service technician.

Water Outlet Fault

The drain is blocked. See “Troubleshooting” on page 12.

Blocked Filter

The filter is clogged. See “Cleaning the Filters” on page 9.

If you have corrected the fault, turn the main power off
then back on to remove the fault indication. If it still
displays, try again to correct the problem or call a service
technician.

PROGRAM TIMES

PROGRAM TIMES

PROGRAM TIMES

PROGRAM TIMES

PROGRAM TIMES

The program times may not always be the same
because of variations in the household hot water
temperature. The dishwasher heats the water to the
proper temperature for the program selected; so if the
temperature of the water entering the dishwasher is too
low, the dishwasher will run longer because it takes
longer to heat the water. Raising your water heater
setting could help to shorten the cycle times.

INTERR

INTERR

INTERR

INTERR

INTERRUPTING

UPTING

UPTING

UPTING

UPTING A PR

A PR

A PR

A PR

A PROGRAM

OGRAM

OGRAM

OGRAM

OGRAM

TO ADD AN ITEM

TO ADD AN ITEM

TO ADD AN ITEM

TO ADD AN ITEM

TO ADD AN ITEM

If you want to interrupt a program to add an item, open
the door slightly until the spray arms stop turning. You
can then open the door fully and place the item into the
dishwasher. Close the door securely. The program will
continue from where it was interrupted.

WARNING!  Be extremely careful when opening the
door during a program. The water is hot and you
could get scalded.

CHANGING OR STOPPING A

CHANGING OR STOPPING A

CHANGING OR STOPPING A

CHANGING OR STOPPING A

CHANGING OR STOPPING A

PR

PR

PR

PR

PROGRAM

OGRAM

OGRAM

OGRAM

OGRAM

If you decide to change the program after you have started
the machine, press the Start/

Stop

 button for three

seconds. You will have to select the program and options
again when you are ready to restart the program. (

Note:

If the program has already gone through the wash cycle,
you will have to add detergent.).

Содержание D3731

















Отзывы: