12
Rinse and hold
For rinsing, with the intention of waiting until
the machine is full before washing.
Plate warm
Use this programme to heat plates.
PRESS THE START BUTTON AND THE MAIN
POWER SWITCH
The machine will start, and automatically car-
ry out the entire washing programme. The mach-
ine will not start if the door is not fully closed.
WANT TO CHANGE YOUR MIND?
If you want to change the programme after you
have started the machine, press Stop for three
seconds. Then select a new programme by pres-
sing the appropriate symbol and then the Start
button.
Integrated machine, first open the door and do
as above. Close the door again.
Want to put more things in the dishwasher?
Open the door, and the machine will stop auto-
matically. Put the dishes in the machine, close
the door and the machine will continue where
it left off.
If you stop the machine with the main power
switch
(or if there is a power failure) before the pro-
gramme is finished, the programme will conti-
nue from where it was interrupted when power
is restored.
N.B.
If the power is turned off, or if the door is open
for more than two minutes, during the drying
phase, the programme will be reset.
AFTER WASHING
When the machine has stopped, it consumes
extremely little power. When the programme
has stopped the indication-lamps are lightning,
this shows that the programme is ready. To
switch it off completely, turn off the main po-
wer switch. Turn off the water tap if the mach-
ine is to be left unattended for a long period, eg,
during holidays.
Содержание D1976
Страница 19: ...19 ...
