Pre-soak
If the washing is stained with blood, for example,
we recommend a presoak. The washing will soak
in cold water for two hours before the wash
program starts.
• Select Presoak by pressing the button under
the symbol.
• The symbol above the button lights when this
option is activated.
7
Close the washer door and
press the Start/Stop button
Time remaining
The time remaining is shown in hours and
minutes. Once a program is selected, the
estimated program time is displayed. This may
differ from time to time depending on the
temperature of the water entering the machine
and the size of the load. If the program time is
longer than the previous wash with the same
program, "0:01" will be displayed until the program
finishes. This is normal! The next time you use
the program under similar conditions, the
estimated program time will be more accurate.
To add or remove washing after the
program starts
If you want to add or remove items after the
program has started, you can stop the program
by pressing and holding the Door opening button
(key symbol) for three seconds. When you restart
the machine, add any extra detergent needed and
close the washer door. The machine continues
automatically from the point where the program
was interrupted.
Stopping or changing a program
You can stop a program by pressing the
Start/Stop button for three seconds. "Stop"
appears in the display. To restart the machine,
select a new program, add any extra detergent
needed and press the Start/Stop button.
NOTE!
Do not open the detergent compartment while
the machine is running.
18
Washing
Содержание Allergy W6888
Страница 34: ...34 Your notes...
Страница 35: ...35 Your notes...