Askey WLH3010 Скачать руководство пользователя

Страница: 42 / 58

54Mbps 802.11g Wireless LAN Card

Card Not Detected

If the Wireless LAN Card is not detected by Windows, try the following:

•

Make sure the Wireless LAN Card is properly inserted in the computer.

•

For PC Card, make sure the slot

in your computer is working.

•

Contact your dealer for additional testing if there is a hardware problem with the Wireless LAN Card.

Cannot Connect to Another Wireless LAN Card

If you cannot make a connection to another Wireless LAN Card from your computer, it could be due to one of the following reasons:

•

Incorrect SSID. Make sure the SSID is the same for all computers that have a Wireless LAN Card.

•

Changes are not being recognized by your computer. Restart your computer.

•

If in Ad-Hoc mode, make sure the

Log on to Windows NT domain

check box is not selected in the

Client for Microsoft Networks

Properties

dialog box in the

Network Configuration

tab.

•

Incorrect IP Address or Subnet Mask. Check these settings in the

TCP/IP Properties

dialog box in the

Network Configuration

tab.

Poor Link Quality

If the Link Quality display stays in the Poor range, it could be due to one of the following reasons:

•

Radio interference.

•

Distance between Wireless LAN Card and Access Point is too far. Decrease the distance between the Wireless LAN Card and Access Point
(or another card).

Cannot Connect to Access Point

If you cannot make a connection to the Access Point, it could be due to one of the following reasons:

•

Make sure the Wireless LAN Card and Access Point have no physical connection problems.

•

Make sure the SSID for the Wireless LAN Card is the same as the Access Point.

•

Make sure the privacy type is the same as that of Access Point. Also, make sure the Default Key is the same for both computers.

Содержание WLH3010



























































Результаты поиска

Содержание WLH3010

Отзывы:

Похожие инструкции для WLH3010

Бренды по названию

Популярные бренды

Askey WLH3010, Руководство пользователя

Результаты поиска

Содержание WLH3010

Отзывы:

Похожие инструкции для WLH3010

Бренды по названию

Популярные бренды