Askey Computer RT410W 802.11 a, Руководство по эксплуатации

Страница: 9 / 24

Chapter 2: Connection
LAN Connection
Attach one end of the Ethernet cable with RJ-45 connector to the LAN port on a computer, and
the other end to this device directly or through a hub.
Connecting the power adapter
Please connect the Station to the power connector port of the Power Adaptor and the other end of
the Power Adaptor to a power outlet.
Setting up a Host PC
To configure the Station via web browser, at least one properly configured PC must be connected
to the network (either connected directly or through an external hub to the LAN port of the
device). The host PC must meet the following requirements:
l
With Ethernet network interface.
l
Must have TCP/IP installed.
l
With a web browser installed: Internet Explorer 5.x or later.
For Ethernet interface : With Ethernet network interface card installed.
For WLAN client : The SSID setting will be the last 6 codes of the MAC address of your Station.
Wireless Network Connection
This station is a device which connected to a client (such as PC or any CE device) with Ethernet.
It uses the MAC address of the station’s client and communicates with a wireless device (e.g.,
access point) which is complied with IEEE 802.11a,b,g. It communicates with a wireless device
on Infrastructure and Ad-Hoc mode. The following picture shows a common constitution of the
system that used a station.