Askey Computer RT410W 802.11 a, Руководство по эксплуатации

Страница: 6 / 24

Chapter 1: Introduction
RT410W is 802.11a or 802.11b/g dual band wireless Ethernet dangle device. Below figure shows
the general constitution of the system that uses the Ethernet dangle.
An Ethernet dangle is a device that connected to a client (e.g., PC, CE - Consumer Electronics
devices) with one to one with Ethernet. The Ethernet dangle uses the MAC address of the dangle
client / PC to communicate with remote 2.4/5 GHz wireless device (complied with IEEE
802.11a/b/g). The Ethernet dangle let your PC or CE (Game box, Set-top box) devices
communicates with wireless access point device that extent your existing home/CE entertainment
network to surf the Internet.
System Requirements
To use this device, you have a RJ-45 connector on your Ethernet network device. Except that,
you will need a directly-connected computer or a wireless client to access its web-based
configuratio n page for proper configuration. Please make sure that you have the following in
your system.
Ø
Windows 98/98SE/ME/2000/XP
Ø
Internet Explore 5.0 or above
Ø
Ethernet interface with 10/100-Base-T RJ-45 port
Ø
TCP/IP protocol is set up
Unpacking
Check the contents of the package against the pack contents checklist below. If any of the items
is missing, then contact the dealer from whom the equipment was purchased.