ASKAYNAK Inverter 205-TIG AC/DC, Руководство пользователя

Страница: 48 / 68

46
General Characteristics
The ASKAYNAK Inverter 205 TIG AC/DC is an TIG and MMA welding machine manufactured using the latest
inverter technology. Power source unit with inverter, is a technology that is introduced to the market in 1980s.
50Hz/60Hz frequency is converted to 20 KHz or above, which means high frequency, by IGBT and then voltage
is decreased and alternating current (AC) is converted to direct current (DC), a powerful DC source current is
created by using PWM technique in inverter technology, the size and weight of the welding machine is decreased
and the efficiency is increased by 30% with inverter technology. The most important specifications of the welding
machines that is produced with inverter technology are providing stabile arc, safety, lightness and energy saving.
The improvement of welding machines with inverter is called a revolution in welding area by experts.
The
ASKAYNAK Inverter 205 TIG AC/DC is a shielded electrode and TIG welding machine features igniting
with HF (high frequency), start current, crater arc current, welding current, base current, duty ratio, upslope time,
downslope time, pre-gas, post-gas, pulse frequency, hot start and arc force etc.
The
ASKAYNAK Inverter 205 TIG AC/DC is suitable for welding for various plates made of stainless steel, carbon
steel, alloyd steel, titanium, aluminum, magnesium, cuprum, etc, which is also applied to pipe installment, mould
mend, petrochemical, architecture decoration, car repair, bicycle, handicraft and common manufacture.
The advantages offered by the ASKAYNAK Inverter 205-DC TIG AC/DC welding machine are:
1- MCU control system , responds immediately to any changes.
2- The newest PFC technology , power factor more than 0.98
3- High frequency and high voltage for arc igniting to ensure the success ratio of igniting arc, the reverse
polarity ignition ensures good ignition behavior in TIG-AC welding.
4- Avoid AC arc-break with special means, even if arc-break occurs the HF will keep the arc stable.
5- Intelligent protection: TIG/DC operation,If the tungesten electrode touches the workpiece when welding, the
current will drop to short-circuit current to protect tungsten
6- DC Pulsed TIG and MMA, adopt IGBT and advanced PWM technology
7- Intelligent protection: over-voltage, under-voltage, over-current, over-heat
8- Light and easy to carry, simple installation.
Input
Power Factor : 1.00
Height
250 mm
Width
138 mm
Length
370 mm
Weight
14.0 kg
Duty Cycle
(10 minutes period)
% 22
% 60
% 100
Output Voltage
(Volt)
18.0 V (AC TIG) 18.0 V (DC TIG) 26.8 V (MMA)
15.6 V (AC TIG) 15.2 V (DC TIG) 24.8 V (MMA)
14.4 V (AC TIG) 14.0 V (DC TIG) 23.6 V (MMA)
Output Current
(Amper)
200 A (AC TIG) 200 A (DC TIG) 170 A (MMA)
140 A (AC TIG) 130 A (DC TIG) 120 A (MMA)
110 A (AC TIG) 100 A (DC TIG) 90 A (MMA)
Output Range
Welding Current Output Rates
Supply Cable: 3 x 2.5 mm 2
Operation Temperature between –10°C and +40°C
Physical Dimensions
Insulation Class : F
Pollution degree : 3
Input Voltage
220 V ± % 10 / 1 Phase
Frequency
50/60 Hertz (Hz)
Power Consumption
4.5 kW (AC-TIG) ( 25 % operation cycle)
5.6 kW (DC-TIG) ( 22 % operation cycle)
6.0 kW (MMA) ( 22 % operation cycle)
Welding Current Range
5 - 200 A (MMA, DC TIG)
10- 200 A (AC TIG)
Maximum Open Circuit Voltage
48 V (AC TIG) 53 V (DC TIG) 45 V (MMA)
U
S
E
R
MAN
U
AL