ASKAYNAK 315-TIG Pulse, Руководство пользователя

Страница: 52 / 78

• Semi-automatic fixed DC voltage machines,
• DC manual arc welding machines,
• Reduced voltage controlled AC welding machines.
The condition of the torch and cables is very important. The plastic or fiber insulator on the handle
prevents contact with live parts. Always check the condition of the handle before operating the arc
welding. Replace the old and worn out handles and do not try to repair. Conduct the same checks
on the cables as well and since replacing the cable may be costly, repair them with a high
resistance heat shrink etc. Check the insulation at all times before operating the machine.
If you feel an electrical shock, remember that this is a warning. In such a case, before continuing
with the work, check your working habits and work environment in terms of electrical shock risks.
In case of any abnormal situation, do not continue with cutting without taking the measures
required. If you cannot identify the source of the problem, have it checked by an authorized
specialist.
PRECAUTIONS FOR THE OTHER PERSONS IN THE WORK AREA:
The cleanliness and order of the work area are very important for you and the other people in the
area both. Other welding operators or people walking around may step into your welding bath
accidentally or trip on the cables and fall inviting the risk of an electrical shock to you and the other
people around. Furthermore, the welding splashes may cause risk of burns to the other people in
the vicinity.
Segregating the cutting site with a fire-proof barrier could reduce the above risks.
Warn other people in the work area about using work safety equipment. In particular if they have to
work in a welding site, warn them about wearing fire-resistant work outfits, work goggles, insulated
shoes and gloves etc. remove the people, who do not heed your warnings, from the work site.
If you are welding on a high place, use warning signs showing the risk of welding splashes falling
down on the people below.
Electromagnetic fields may be dangerous for the pace-makers.
Warn the people in the vicinity, regardless of operators or otherwise, regarding the above and post
warning signs. Tell such people that they should consult a doctor before entering the cutting area.
The welding sites pose high risk of electrical shocks. Other people may face the risk of an electrical
shock by passing on a cable while working around. Do not use un-insulated welding cables and
pass the cables through insulated, plastic ducts where possible.
INFORMATION ABOUT THE RESIDUAL RISKS:
Askaynak Inverter 315-TIG Pulse welding machine has been designed and manufactured in
conformity with the safety rules setout by the EN 60974-1 standard. All the measures required for
eliminating the safety risks involved have been taken and the measures to be taken by the users
and the rules to be observed have been indicated in the user manual. Eliminating the said risks is
not possible if due care is not exercised and the safety measures prescribed are not taken. Such
risks may start from slight injuries, but the risk of explosion may become fatal for multiple people as
well. Ensuring the safety of the welding area is the responsibility of the user and if the said
measures are not taken properly, the work must be stopped and the authorized persons must be
notified.
Safety In Welding - 7
USER
MANU
AL
50