IR OUT&RESET:
Insert IR transmitter cable & Factory Reset Button
IR IN&RESET:
Insert IR receiver cable & Factory Reset Button
OPERATIONG AND CONNECTION
:
1.Connect one HDMI cable from the DVD/BD player into the HDMI input port of the HDMI wireless TX.
2.Connect one HDMI cable from TV/Monitor into the HDMI output port of the HDMI wireless RX.
3.Connect the IR Transmitter cable to the HDMI wireless TX and the IR Transmitter cable must face to
the control target device.
4.Connect IR Receiver cable to the HDMI wireless RX.
5.Connect 5V power supplies to the TX&RX, the POWER indicator will be lit at this moment.
6.The device will automatically connect after power on. The STATUS indicator of TX and RX will be lit
when the connection is successful. If the HDMI input or output signal is normal, the HDMI indicator
light will be lit also. The STATUS indicator flashes continuously during normal transmission.
7. In the case of multiple RX, all RX are connected in the same way.
FIG.5 CONNECTION DIAGRAM
Wireless signal
IR Transmitter cable
TX
RX
HDMI cable
HDMI cable
IR Receiver cable
HDTV Monitor/Projector
DVD/PS3/STB/PC
Local monitor
HDMI cable
