Asist AE2V20B-202-BMC-1 Скачать руководство пользователя страница 47

Страница: 47 / 86

AE2V20B-202-BMC-1

- BAttEry DrILL 20V

1. Working Environment

a) Keep the working area clean and well-illuminated.

Mess and dark spaces in the working area are the

most co on cause for injuries. Please store the tools

properly when not in use.

b) Do not use the power tool in the environment with

the risk of fire or explosion, i.e. in areas where fla able

liquids, gases or dust are present. Sparks are formed

on the co utator of the power tool and may cause igni-

tion of dust or vapours.

c) When using power tools, prevent access of unau-

thorized persons, in particular children, to the work-

space! If distracted, you can lose control of activities

performed. Never leave power tools unattended. Pre-

vent access of pets/animals to the equipment.

2. Electrical Safety

a) The power cable plug of the power tool must match

the wall socket. Never alter the plug in any way. Never

use two-way adaptors or any other adaptors with the

tools having a protective pin in the power cable plug.

Undamaged plugs and matching sockets reduce the

risk of electric shock. Damaged and tangled power

cables increase the risk of electric shock. Should the

power cable be damaged, it must be replaced by a

new power cable that may be acquired in our author-

ized service centre or from the importer.

b) Avoid body contact with grounded objects, i.e. pip-

ing,

central heating radiators, cookers and refrigerators.

Risk of electric shock is increased when your body

touches the ground.

c) Do not expose the power tool to rain, humidity or

other wet conditions. Never touch the power tool with

wet hands. Never wash the power tool under running

water. Never i erse it in water.

d) Do not use the power cable for any purpose other

than for which it is intended. Never carry or pull the

power tool by its power cable. Do not pull the plug from

the socket by cable pulling. Prevent mechanical dam-

ages to the electric cables by sharp or hot objects.

e) The power tool has been manufactured for powering

by the alternating current. Always check the compli-

ance of the voltage with the rated voltage stated on the

nameplate.

f) Never use the power tool with a damaged cable or

plug, or which fell to the ground and is damaged in any

way.

g) Should you use an extension cable, always check

the compliance of its technical parameters with speci-

fications stated on the nameplate. If the power tool is

used outdoors, use an extension cable suitable for out-

door use. When using extension drums, these must be

unwound to prevent cable overheating.

h) Should the power tool be used in damp areas or out-

doors, it may be used only if connected to an electric

circuit with a circuit breaker ≤30 mA. Use of electric

circuits with an RCD device reduces the risk of electric

shock.

i) Hold the hand power tool only by insulated surfaces

intended for gripping since the cutting or the welding

equipment may touch a hidden wire or the power cable

of the tool during operation.

3. Personal Safety

a) When using the power tool, be attentive and vigilant,

pay maximum attention to the activity you are doing.

Focus on work. Do not use the power tool when tired

or under the influence of drugs, alcohol or medication.

Even a moment of inattention when using a power tool

may result in a serious personal injury. When working

with power tools, do not drink, eat or smoke.

b) Use protective equipment. Always wear eye protec-

tion. Use protective equipment corresponding with the

type of work you are doing. Protective equipment,

e.g. a respirator, safety slip-resistant shoes, headwear

or hearing protection in accordance with conditions of

work reduce the risk of personal injury.

c) Avoid accidental power tool activation. Do not carry

power tools connected to the mains with your finger on

the trigger or the switch button. Before connecting to

the mains, check that the switch or the trigger is in the

“off” position. Carrying of power tools with your finger

on the switch or inserting the power tool plug into a

socket with a switch being “on” may result in serious

injuries.

d) Before switching the power tool, remove all ad-

justment wrenches and other tools. The adjustment

wrench or a tool that remains attached to the rotating

part of the power tool may result in injuries of bystand-

ing people.

e) Always keep stable position and balance. Work only

on areas that you can safely reach. Never overesti-

mate your own strength. Do not use power tools when

tired.

f) Dress appropriately. Wear working clothes. Do not

wear loose-fitting clothes or jewellery. Be careful not to

allow your hair, clothes, gloves or other parts of your

body to get too close to the rotating or hot parts of the

power tool.

g) Connect an equipment for dust extraction. If the

power tool may be connected to an equipment for cap-

GENERAL SAFETY INSTRUCTIONS

Please read, remember and keep these safety instructions for future reference

WARNING: When using electric machines and power tools, always comply with the following safety instructions to

protect against an electric shock, personal injury or the risk of fire. Within the meaning of these instructions, the ex-

pression “power tool” means both power tools powered from the mains (power cable) and power tools powered from

batteries (no power cable).

Keep all warnings and instructions for future use.

Содержание AE2V20B-202-BMC-1























































































Результаты поиска

Содержание AE2V20B-202-BMC-1

Отзывы:

Похожие инструкции для AE2V20B-202-BMC-1

Бренды по названию

Популярные бренды

Asist AE2V20B-202-BMC-1, Инструкция по эксплуатации

Результаты поиска

Содержание AE2V20B-202-BMC-1

Отзывы:

Похожие инструкции для AE2V20B-202-BMC-1

Бренды по названию

Популярные бренды