23
TO SET AND USE “DOUBLE REPEAT TIMER”
TIMER MODE
●
Two timers repeat counting down the respective set times alternately as many times as necessary.
[1]
Keep Button “B” pressed for more than 2 seconds in the TIMER Mode. The Timer
Setting Display appears, and the digits of the number of repetitions start flashing.
* Unless the timer has been reset, the Timer Setting Display will not appear. For the method
of resetting the timer, see “To Start, Stop and Reset Timer” below.
[2]
Press Button “A” or “D” to set the flashing digits.
* If Button “A” or “D” is kept pressed for more than 2 seconds, the digits move quickly.
[3]
Press Button “E” to show the next digits to be adjusted (flashing).
[4]
Repeat
Steps
[2]
and
[3]
to set the digits in the order shown in the illustration at
right.
[5]
After all the adjustments are completed, press Button “B” to return to the TIMER
Mode. All the settings are registered in memory.
* If the watch is left untouched in the Timer Setting Display with the digits flashing, the display
will automatically return to the TIMER Mode in 2 to 3 minutes.
■
Timer Setting Procedure
■
To Start, Stop and Reset Timer
TIMER-1
TIMER-2
TIMER-1
TIMER-2
TIMER-1
TIMER-2
TIMER Mode
TIMER-1
TIMER-2
1. Timer operation
・
Press Button “A” to start TIMER-1. The flashing Timer mark “
” is shown while the
timer is counting down.
・
When TIMER-1 has finished counting down the set time, TIMER-2 starts countdown. If
“2” or more is set for the number of repetitions, both timers repeat counting down the
respective set times alternately for the number of times you have set.
・
The time-up warning beep starts beeping 3 seconds before each timer finishes
counting down, and the time-up beep sounds for 3 seconds when the respective set
times are up.
・
The time-up beeps for TIMER-1 and TIMER-2 sound differently from each other.
・
To stop the time-up beep, press any of the buttons.
・
When both timers have finished counting down the respective set times for the set
number of times, they are automatically reset.
2. To stop timer during countdown
・
Press Button “A” to stop the timer. The Timer mark stops flashing.
* When the time-up beep is sounding, press any of the buttons to stop it, and then, press Button “A” to
stop the timer.
・
To restart the countdown, press Button “A”.
・
By pressing Button “A” while the timer is stopped, it will be reset.
Timer Setting Display
Displayed
alternately
* When the TIMER Mode appears, “TIMER” is shown in the upper row of the
display for 1 second, and then, the Timer Display appears.
Button “B”:
Returning to TIMER Mode
Button “C”:
Turning on backlight
Button “C”:
[Press for more than 2 seconds]
Returning display to
TIME Mode
Button “B
”
:
[Press for more than 2 seconds]
Activation of Timer Setting
Display
Button “D”:
Decreasing digits to be adjusted
Button “E”:
・
Reset
・
Selection of digits to be adjusted
Button “A”:
・
Start / Stop
・
Increasing digits to be
adjusted
* While the Interval Timer function is in use,“CHR in USE”
is displayed, and the TIMER function cannot be used.
Number of repetitions
Press for
more than
2 seconds.
Hour
Minute
Seconds
Hour
Minute
Seconds
Number of
repetitions
Start
Time-up beep
End of
TIMER-1
End of
TIMER-2
Timers repeat counting down for
the number of times you have set.
・
From 10 seconds up to 99 hours 59 minutes and 59 seconds can be set for each timer.
・
By setting “00:00’00”” for TIMER-2, TIMER-1 can be used alone as an independent
timer.
[ TIMER-1 ]
[ TIMER-2 ]
AH01-WJ30WJ31̲英語版.ai 1 2013/02/24 21:35:10
