FOR MOD
EL
№
FS
-0300
HAN
D
SANITIZER DISP
ENSER ST
AND
ASSEMBL
Y
INSTRUCTIONS
A
M
ER
IC
A
N
SPEC
IA
L
T
IES,
IN
C
.
441 Saw
M
ill
R
iv
er
R
oad,
Y
onk
ers
,
N
Y
10701
(914)
47
6.
90
00
•
(9
14)
476
.0688
w
w
w
.am
eric
ans
pe
cialt
ie
s.
com
043020103520 04APR20
A
1. ASSEMBLY:
1.1 Lock post to base with one (1) split helical lock washer (supplied) and 5/16" -18 x 1" hex bolt (supplied)
using a 1/2" [13] wrench (by others), as shown on detail A
2.2 Unit should be placed in location to maximize access by pedestrian traffic and to not interfere with any ac-
cessible route clearances.
2. STEPS TO INSTALL 20364 AND 20365
2.1 Secure dispenser (supplied separately) to the stand mounting plate (factory installed) with four (4) screw-posts
(supplied) through concealed mounting holes in the dispenser back (see Detail B and Detail C)
2.2 Use two (2) #2 Philips bit screw drivers (by others) into binding barrels (supplied) inserted from behind the
mounting plate (see detail C).
2.3 Follow detailed Set-up instructions & provided in dispenser Owner Manual (OM) provided with dispenser.
2.4 When assembly is completed no fasteners are visible on exposed dispenser surfaces.
BASE
POST
HEX BOLT (SUPPLIED)
SPLIT LOCK WASHER
(SUPPLIED)
1/2" [13] WRENCH
(BY OTHERS)
DETAIL A
BINDING BARREL AND
SCREW SUPPLIED
LOOSE IN KIT
QTY = 4
PHILIPS SCREW
DRIVER (BY OTHERS)
PHILIPS SCREW
DRIVER (BY OTHERS)
BINDING BARREL
AND SCREW
(SUPPLIED)
TYPICAL OF FOUR (4)
PHILIPS SCREW DRIVER
(BY OTHERS)
SCREW (SUPPLIED)
TYPICAL OF FOUR (4)
BINDING BARREL (SUPPLIED)
TYPICAL OF FOUR (4)
PHILIPS SCREW DRIVER
(BY OTHERS)
B
DISPENSER SUPPLIED SEPARATELY.
MODEL N° 20364 DISPENSER SHOWN FOR REF ONLY.
MODEL N° 20365 SIMILAR
DETAIL B
C
DETAIL C
DISPENSER SUPPLIED SEPARATELY.
MODEL N° 20364 DISPENSER SHOWN FOR REF ONLY.
MODEL N° 20365 SIMILAR
