Page
9
of
46
P764-772
INSTALLATION
Note:
DO NOT tighten any bolts until all bolts have been started; Philips screw driver NOT included.
1.
Attach the left side (D), right side (E), and back
(F) with 4 bolts ¼ in x 15 mm (M), 4 flat washers
(N) and 4 spring washers (P) by using the Allen
wrench (J) as shown on the right,(see Figure1).
Figure 1
2.
Attach the gas cylinder holder (H) to the left side (D) and right side (E) with
4 bolts ¼ in x 15 mm
(M), 4 flat washers (N) and 4 spring washers (P) by using the Allen wrench (J), (see Figure 2).
Figure 2
