Ashley BCAC Скачать руководство пользователя страница 4

Страница: 4 / 24

To assure that satisfactory and safe service is

received from this heater:
• Read these instructions entirely before beginning

any part of the installation.

• Use these instructions as a guide during the

installation of the heater.

• Be sure these instructions become the property of

and are reviewed by all future users of this heater

to encourage proper operation and maintenance

of this appliance.

THIS HEATER IS ONLY FOR BURNING COAL. USE

OF ANY OTHER SOLID FUEL EXCEPT FOR COAL

IGNITION PURPOSES IS A VIOLATION OF FEDERAL

LAW.
This heater is designed to burn stove size bituminous

or anthracite coal and to provide heat to one or

more rooms. Because of its radiating characteristics,

this heater must be installed as an unenclosed,

freestanding unit with clearances to combustibles

as specified by these instructions. This heater must

be connected to a Listed Factory-Built Residential

Type and Building Heating Appliance Chimney or

a properly constructed and maintained masonry

chimney.
DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE

SERVING ANOTHER APPLIANCE.
This heater is not designed to burn lignite coal,

liquid fuels, and gaseous fuels or household refuse.

Any attempt to burn these type fuels, to enclose the

heater or to attach the heater to an air circulation

system or a stoking device can be very hazardous.
THIS HEATER IS NOT DESIGNED TO BE USED IN A

MOBILE HOME.

Do Not Overfire - If Heater or Chimney Connector

Glows, You are Overfiring.

Improper installation or use of this heater can cause:
1. Damage to the heater from overheating.
2. Hazardous temperatures to develope on

combustible materials adjacent to the heater,

chimney connector or chimney.

3. Possible hazardous accumulation of coal gases

within the heater.

4. Release of hazardous gas into the dwelling.

BUILDING CODES AND SAFETY

STANDARDS

Before beginning the installation, you should check

with local building officials to assure compliance

with local regulations and codes.

HOW THIS HEATER OPERATES

The chimney draft draws in combustion air through

an adjustable air inlet thermostat located inside the

cabinet. Air flows through and across the bed of fuel,

causing the fire to progress through the fuel bed.

Heat is transferred to the air that flows between the

cabinet and the firebox. Any attempt to alter this

air by connecting this heater to a duct system or air

movement fans other than the optional B36 listed

blower, available from your heater dealer, can lead

to improper and possibly hazardous operation of

this heater.

SELECTING A LOCATION FOR THE

HEATER

When selecting a location for the heater, be sure

attention is given to the following considerations:
1. If the heater is to be vented into a Listed High

Temperature Type HT Factory-Built Residential

Type And Building Heating Appliance Chimney,

review the installation instructions for the

chimney to comply with requirements for proper

chimney location, height, space requirements,

etc.

2. If the heater is to be vented into a masonry

chimney, the heater should be located as near

the chimney as possible without failing to

comply with the requirements for minimum

spacing between the chimney connector,

heater and combustibles. (Be sure chimney is

constructed according to NFPA standards.)

3. The location of the heater must provide at least

the minimum clearances between the heater,

chimney connector and combustible materials

as specified in this manual.

4. If the heater is to be located on a combustible

floor, there must be suitable floor space to install

a floor protector beneath and extending beyond

the heater as shown by and as described by the

Floor Protection section of this manual.

5. The heater should be located centrally within

the area where heat is desired but out of traffic

areas to minimize the likelihood of persons

accidentally contacting the hot surface of the

heater.

6. The heater should be located away from

doorways and central heat outlets and inlets

INTRODUCTION

Содержание BCAC

























Результаты поиска

Содержание BCAC

Отзывы:

Бренды по названию

Популярные бренды

Ashley BCAC, Инструкция и руководство по эксплуатации для владельца

Результаты поиска

Содержание BCAC

Отзывы:

Бренды по названию

Популярные бренды