SIGNATURE DESIGN BY ASHLEY
®
All Rights Reserved.
7.
Connect the Power Transformer cable to the corresponding plug coming from the back of the chair
Figure A #4
8.
Connect the Power Cord into the Power Transformer
Figure A #5
9.
Connect the power cord into an electrical outlet near where the chair will be used
Figure A #6
WARNING:
Clear area below chair before opera�ng to reduce risk of injury or death.
FLOOR GLIDES
-Your Ashley Power Chair has four adjustable floor glides. These glides can be adjusted to level your chair on uneven flooring. Remove
these floor glides may result in damage to your chair and flooring.
TROUBLE SHOOTING
-PROBLEM
Chair will not operate
-POSSIBLE
F
ACTORS
Transformer may not be connected
-SOLUTIONS
Ensure both wire from the chair and the power cord is
fir
mly conneed to the transformer
OPTIONAL LITHIUM BATTERY PACK:
By adding the lithium ba
�
ery pack to the power transformer, it enhances your exis
�
ng power transformer with ba
�
ery back-up
feature.
If you wish to purchase the lithium ba�ery pack, please contact us at 1-844-696-6886.
F
igure E
Page 5 of 23
00145D
The power bu�on is intended to allow you to disable the chair func�ons.
To stop the chair from func�oning using the power bu�on, press the Power Bu�on un�l the LED light is off.
If the chair is not func�oning, check the plug in and connec�on of the cords first (The order is A-B-C-D), see
Figure A
If all connec�ons are good, verify the LED is lit on the power bu�on. See illustra�on on bo�om of page
Figure A-Power Button
Be sure cords are clear from the chair prior to opera�on.
May , 2019