2
Squeeze the ends of
the U shape yarn guides
together and locate them
into the small holes in
the base. Gently tap in if
necessary.
Locate the 2 yarn tension
pins into the large holes
in the base and gently
tap in.
Before commencing, please read these instructions
completely, identify the parts and note the
assembly sequence.
Finishing the wood. The Silver Beech tree is a native
of New Zealand and has a lovely variety of colour
and grain. This skein holder has been finished
with a water based lacquer to protect the kiln dried
timber from climatic changes and enhance its
natural character. To repair and restore the finish
use Ashford Wax Polish.
ASSEMBLY INSTRUCTIONS FOR
THE ASHFORD SKEINER 2
More Information
The Wheel Magazine
Ashford’s annual fibrecraft
magazine. Spinning, weaving,
felting, dyeing and knitting
projects, patterns and articles
from around the world. To
receive the glossy version
delivered to you, subscribe at:
www.ashford.co.nz/subscribe
How-to videos on You Tube
Watch our how-to videos on You Tube.
www.youtube.com/user/AshfordHandicrafts
Join us on facebook.
www.facebook.com/ashford.wheels.looms
Check hardware against full
size illustration.
To make assembly easier use
candle wax on the screws.
Check the directions carefully.
Hints
Tools Required
