3
1
Rub candle wax onto
both ends of the roller.
Then insert the long
end through the roller
support.
Rub candle wax onto the
thread of the 30mm (1
¼") bolt. Then attach the
pawl to the roller support
from the inside with this
bolt. NOTE the clicker pin
fits into the gap in the
pawl. Take care to ensure
the “clicker pin” does
not damage your table.
Leave 0.5mm (1/32")
gap under the head of
the bolt, DON’T over
tighten. The pawl should
move freely and “click”
as it snaps past the pin.
