4
1
1
1
1
Place the cog onto the
end of the roller. Check
the teeth engage the
pawl. THEN secure with
a washer and 25mm (1")
screw.
Locate the 4 pins on the handle into the 4 holes in the cog.
Then give the handle a sharp hit with your fist so it snaps
down tight onto the cog. When you are ready to advance the warp,
release the warp tension by turning the handle slightly and then
lifting the pawl out of the teeth.
Secure the second roller
support to the roller with
a 30mm (1¼") screw
and washer.
