2
Assembly
Yarn Guide
Squeeze
Orifice Reducer Bushes
Before commencing, please read these instructions
completely, identify the parts and note the
assembly sequence.
Finish
Your e-Spinner Super Jumbo has been lacquered
prior to assembly. If desired Ashford Finishing
Wax Polish may be applied to further enhance its
appearance.
3.
Squeeze and slide the stainless-
steel yarn guides onto opposite
sides of the flyer arms.
NOTE: when spinning at higher
RPM it may be necessary to
squeeze and rotate whichever yarn
guide isn’t being used to achieve
perfect balance.
4.
Apply a drop of oil to the flyer
spindle and slide the bobbin on.
1.
Locate the two Orifice Reducer
Bushes into the holes in top of the
base.
2.
Locate the threading hook into
the tapered hole in the front. This
will only be required when using
the Orifice Reducer Bushes.
Lubrication
- We recommend Ashford Spinning Wheel Oil
be regularly applied to the front and rear
flyer and bobbin bearings.
- The bobbin and flyer must revolve freely
and independently of each other.
- The ball bearings in the motor may be noisy
for the first 5-10 minutes as they “run-in”
and the grease is dissipated evenly.
ASSEMBLY INSTRUCTIONS FOR
THE ASHFORD e-Spinner Super Jumbo
Threading Hook
