background image

ASG, Division of Jergens, Inc.  

15700

 S. Waterloo Road | Cleveland, OH 44110-3898 | Phone: (888) 486-6163 | Fax: (216) 481-4519 | Email: [email protected] | www.asg-jergens.com

Page 11 of 15

The Auto-Reset feature is used to automatically reset the reading value in peak mode.  
This mode works when the reading value is higher than the setting value, causing the 
peak value to change to a new held value.  The user does not need to press the 

RESET

 

key, since the peak value will automatically reset.  This feature works in peak mode 
only.  If this feature is activated, the icon “AR” will display on main display. 
•  To set Auto-Reset, press the 

MENU/ESC

 key, the display will show the main 

menu page.  Use the 

UP

 and 

DOWN ARROW

 keys to move the cursor point to 

SETTING

.  Press the 

ENTER

 key and use the 

UP

 and 

DOWN

 

ARROW

 keys to 

move the cursor point to A

UTO-RESET

.  Press the 

ENTER

 key.  The display will 

show the Auto-Reset menu page.

•  Press the 

ESC

 key to return the main menu page

•  Use the 

UP

 and 

DOWN ARROW 

keys to change the value. Use the 

RIGHT ARROW

 

key to change the unit.  Press 

ZERO

 key to reset value to zero.  Press 

ENTER 

key to 

set new value and return to setting menu.  Press 

ESC

 to return to setting menu.

•  Auto-Reset feature will automatically be disabled if you set 

AUTO-RESET

 = 0

•  To set Auto-Shutdown, press the 

MENU/ESC

 key, the display will show the main 

menu page. Use the 

UP

 and 

DOWN ARROW

 keys to move the cursor point to 

SETTING

.  Press the 

ENTER

 key and use the 

UP

 and 

DOWN

 

ARROW 

keys to 

move the cursor point to 

AUTO-SHUTDOWN

.  Press the 

ENTER 

key.  The display 

will show the Auto-Shutdown menu page.

•  The Auto-Shutdown feature can be enabled to conserve battery power where the 

meter powers down after 5, 10, and 15 minutes (depending on auto-shutdown 
time) since the last key press.  Use the 

UP

 and 

DOWN ARROW

 keys to move the 

cursor to the auto-shutdown time preferred and press 

ENTER.

•  Press 

ESC

 key to return to the main menu page.  If you activate this feature, 

the 

OFF

 symbol will be displayed on the main display.

Auto-Reset

Auto-Shutdown

DTT-L Series Digital Torque Testers 

User Manual

Main Menu (Continued)

Содержание DTT-L 10
















Отзывы: