background image

6

2.2 Compatibility

Platform(s)

PC (Windows 10, 11)

Games

Assetto Corsa

Assetto Corsa Competizione

DiRT Rally

DiRT Rally 2.0

F1 Series

iRacing

Project Cars 2

rFactor 2

+ many other games that accept 

direct input devices

2.3 Reasonably Foreseeable Unintended Use

The following is considered misuse and may void the warranty: 

•  Use of adaptors or extension sets for cables; 
•  Use of other cables than provided with the product; 
•  Use in an environment that varies from or exceeds the given  

 

 

environmental conditions; 

•  Use that varies from or exceeds the given operating conditions; 
•  Failure to comply with the instructions in this manual; 

•  Failure to eliminate faults, malfunctions, or defects of the product    
 

that impose safety risks; 

•  Unauthorized removal or modification of parts or safety devices of    
 

the product; 

•  Use of spare parts or accessories that Asetek SimSports has not  

 

 approved; 
•  Mounting and/or use of any parts in a vehicle; 
•  Adjusting pedal settings during operation; 
•  Operation in a flammable and/or explosive environment.

2.4 General Specifications

Dimensions (D x W x H)

406  x 115 x 256 mm

Weight

1,6 kg

Materials

Pedals: Aluminum

Sensor Types

Hall sensor

Operating Temperatures

15°C to 35°C, room temperature

Содержание Invicta Sim Racing Clutch





































Отзывы: