Asetek Invicta Sim Racing Clutch, Руководство пользователя

Страница: 13 / 36

11
10. Align the holes in the clutch to the two existing mounting
holes in your sim racing cockpit, if available.
11. Mount the clutch and brake & throttle to your sim racing
rig.
If there are holes available:
12. Mount the clutch to the existing holes using
two (2) provided M6x20 bolts, two (2) washers, and
two (2) hex nuts or two (2) M6 slot nuts (depending
on your rig).
9. Route the cable under the Invicta Brake & Throttle through
the bezel and insert the cable to the Invicta Clutch
8. Use the four (4) M6x5 set screws from above to secure the
guiding pins in place.