Aseptico ADU-22, Инструкция по эксплуатации и техническому обслуживанию, Страница: 4 / 12

2
1. Place the ADU-22 Cart in an upright
position on a flat, stable surface. Loosen
the center column retaining knob and
extend the telescoping upper portion.
Tighten the knob at the desired height
(Fig. 1).
2. Check to make sure the syringe, highspeed
and lowspeed handpieces are hanging in
their proper holder. Locate the foot control
on the floor (Fig. 1).
AA-21
HIGH VOLUME
VACUUM
SYSTEM
THREE-WAY
SYRINGE
NWS-8 HDPE
WATER SUPPLY
TANK
HIGHSPEED
HANDPIECE
CONTROL
REMOVABLE
INSTRUMENT
TRAY
3. The ADU-22 unit must be connected to a
dry, filtered, 60-90 psi air source. Simply
extend the 1/4" grey air supply line exiting
from beneath the ADU-22 console and
connect the quick-disconnect into the
compressed air source (Fig. 2)
LOWSPEED
HANDPIECE
CONTROL
TELESCOPING
CENTER
COLUMN WITH
RETAINING
KNOB
FOOT
CONTROL
Figure 1.- ADU-22 Cart System
SETTING UP THE SYSTEM:
Figure 2 - Air Supply Connector
CONNECT TO
60-90 PSI
AIR SOURCE