Asentria SiteBoss 530 User Manual
25
Username
and
Password
specify the PPP Username and PPP Password for the DSL interface when the DSL
type is set to PPPoA or PPPoE. These should be set as directed by your ADSL provider and are required for
DSL operaton. Values are text strings, max length 64 characters.
IP Address
sets the public IP address of the unit in the case where the DSL link is active. If the DSL type is
STATIC, the user needs to set this. If the DSL Type if DHCP, it is set automatically. This should be set as
directed by your ADSL provider. Value is a dotted quad IP address. Default setting is 0.0.0.0
Mask
sets the subnet mask used on the DSL interface. If the DSL type is STATIC, the user needs to set this. If
the DSL Type if DHCP, it is set automatically. This should be set as directed by your ADSL provider. Value is a
dotted quad subnet mask. Default setting is 0.0.0.0
Router
sets the router for the DSL interface. If the DSL type is STATIC, the user needs to set this. If the DSL
Type if DHCP, it is set automatically. This should be set as directed by your ADSL provider. Value is a dotted
quad IP address. Default setting is 0.0.0.0
VPN Settings
SiteBoss 530 - VPN Settings
A) General Settings
B) VPN 1
C) VPN 2
D) Commissioning Settings
Following describes the menu options for configuring VPN Settings. These settings are only for use with the Asentria
SitePath secure, unified administration portal software. More information concerning the use of VPNs can be found in
the
in this User Manual, or in the SitePath User Manual. Contact
information.
displays a sub-menu where the VPN Mode, On-Demand Port as well as Active and SitePath VPN
channels are configured.
display the configuration menu for each VPN.
displays a sub-menu where all the parameters for commissioning the S530 with the
SitePath application are configured. Commissioning is the process of automatically configuring a unit and making
SitePath aware of it at the same time. Commissioning is covered in detail in the SitePath User Manual.
General Settings
SiteBoss 530 - General VPN Settings
A) Mode [SSL CLIENT]
B) VPN On-Demand Port [60001]
C) Active VPN [NONE]
D) SitePath VPN [NONE]
Mode
toggles between SSL Client, SSL Server, IPsec Host, and IPsec Private Subnet to specify the VPN mode
configured on Asentria units that are currently connected for commissioning.
VPN On-Demand Port
sets the port to use for VPN on-demand (VOD) communication. Values are: 0 to 65535.
Default setting is 60001. See the
section in the VPN Chapter for more information.
Active VPN
toggles VPN1, VPN2, or None to set which, if any, of the two available VPNs is active. Only one VPN
can be active at a time. To disable VPN functionality, set this to “None”. Default setting is None.
SitePath VPN
toggles VPN1, or None to control which VPN is used for SitePath. Currently only VPN1 can be used
for SitePath. When SitePath is in use, set this to "VPN1". When SitePath is not in use, set this to "None”. SitePath
typically configures this automatically. Default setting is None.
Содержание SiteBoss 530
Страница 6: ......
