Asentria SiteBoss 530 Скачать руководство пользователя | Manualshive

Страница: 140 / 140

background image

Asentria SiteBoss 530 User Manual

134

Warranty Information

Asentria Corporation hereby warrants that it will, as the buyers sole remedy, repair or replace, at its option, any
part of the S530 which proves to be defective by reason of improper materials or workmanship, without charge for
parts or labor, for a period of 12 (twelve) months. This warranty period commences on the date of first retail
purchase, and applies only to the original retail purchaser.

To obtain service under this warranty, you must obtain, by telephone, postal letter, or email, a return authorization
number from Asentria Technical Support. This authorization number may be obtained by contacting Asentria
Technical Support at the address and/or phone number below. The defective unit is to be returned to Asentria
with shipping prepaid, and the return authorization number must be clearly marked on the outside of the package
containing the defective unit.

The dealer's bill of sale or other satisfactory proof of the date of purchase may be required to be presented in
order to obtain service under this warranty.

This warranty applies if your S530 fails to function properly under normal use and within the manufacturer's
specifications. This warranty does not apply if, in the opinion of Asentria Corporation, the unit has been damaged
by misuse; neglect; or improper packing, shipping, modification, or servicing by other than Asentria or an
authorized Asentria Service Center.

In no event shall Asentria Corporation be liable for any loss, inconvenience or damage, whether direct, incidental,
consequential or otherwise, with respect to the S530. Asentria Corporation's liability shall be limited to the
purchase price of the S530. No warranty of fitness for purpose, or of fitness of the S530 for any particular
application is provided. It is the responsibility of the user to determine fitness of the S530 for any particular
application or purpose.

This warranty gives you specific legal rights. These rights may vary from state to state, as some states do not
allow limitations on liability.

You may request information on how to obtain service under this warranty by contacting Asentria Technical
Support at the address and phone number below:

Asentria Technical Support

1200 North 96th St.

Seattle, WA 98103

206.344.8800

«
...
138
139
140

Содержание SiteBoss 530













































































































































Отзывы:

Нет отзывов

Похожие инструкции для SiteBoss 530

Бренд: Rayrun Страницы: 2

Бренд: IDenticard Страницы: 2

Бренд: 3Ware Страницы: 2

Бренд: 7bit Страницы: 2

Бренд: Jafar Страницы: 15

Бренд: Fairchild Страницы: 2

Бренд: Fairford Страницы: 233

Бренд: Febco Страницы: 12

Бренд: Game ready Страницы: 21

Бренд: VAMP Страницы: 304

Бренд: GBD Страницы: 15

Бренд: Oceanic Страницы: 11

Бренд: York Страницы: 20

Бренд: Rane Страницы: 2

Бренд: Xylem Страницы: 48

Бренд: YOKOGAWA Страницы: 150

Бренд: YOODA Страницы: 3

Бренд: YMGI Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды