ASEA AC55LC-3 Скачать руководство пользователя страница 2

Страница: 2 / 75

AC55LC-3, AC63LC-3, and AC75LC-3 Operations Manual....

CERTIFICATION

ASEA Power Systems certifies that this product was thoroughly tested and inspected and found to meet or

exceed its published specifications when shipped from the factory.

WARRANTY

ASEA Power Systems warrants each unit to be free from defects in material and workmanship. For a period of

18 months after purchase or 12 months after installation (whichever is shorter), ASEA Power Systems will

repair or replace any defective module provided the unit has been installed and operated in a manner according

to this manual. A thorough inventory of spare parts & modules is maintained at our factory. Our world-wide

sales/support facilities also inventory a complement of spare parts and modules.

ASEA Power Systems is not responsible for consequential damage arising from the use of its equipment. It

does not apply to extensively modified or non-standard systems. Debit memos for returned

units are not

accepted, and will cause return of the system without repair.

LIFE SUPPORT POLICY

ASEA Power Systems does not authorize the use of any of its products or systems for use an AC voltage

supply (source) for life support systems. Life support systems are devices which support or sustain life, and

whose failure to perform, when properly used in accordance with this Operations Manual, can be reasonably

expected to result in significant injury to the user.

Содержание AC55LC-3












































































Результаты поиска

Содержание AC55LC-3

Отзывы:

ASEA AC55LC-3, Руководство по эксплуатации, Страница: 2 / 75

Результаты поиска

Содержание AC55LC-3

Отзывы: