Ascot 302-19150, Руководство по эксплуатации

Страница: 5 / 9

OPERATING INSTRUCTIONS
3
1. Install the handle assembly according to the assembly drawing.
2. Close the release valve by turning the handwheel clockwise until it is firmly closed.
3. Apply the emergency brake and use wheel chocks to block all wheels to prevent any movement of the
vehicle being lifted.
4. Adjust the handle angle to place the jack into position and adjust the extension screw as needed.
5. Connect the quick coupler-male into the shop air supply hose quick coupler-female, then turn on the air
valve.
6. Raise the load to desired height, turn off the air valve and immediately
USE JACK STAND PAIR
with
adequate capacity to support the load.
7. When work is done, disconnect the quick coupler-male from the air source and carefully remove the jack
stands.
8.
SLOWLY and CAREFULLY
lower the load by turning the handwheel counter-clockwise in extremely small
increments, then lower the extension screw by turning it clockwise as needed and remove the jack.