ascon 4AC20C, Руководство по установке

Страница: 21 / 140

1-8
English
4AC20C/CR 4AC25C/CR 4AC30C/CR 4AC40C/CR 4AC50C/CR 4AC60C/CR
Model
AC20C/CR AC25C/CR AC30C/CR AC40C/CR AC50C/CR AC60C/CR
Voltage Range ** 220 ~ 240V /1Ph /50Hz + N +
!
380 ~ 415V /3Ph /50Hz + N +
!
Recommended Fuse * A 27 38 45 22 24 29
Power Supply Cable Size * mm
2
10 10 10 5 5 5
Number of Conductor 3 3 3 5 5 5
Interconnection Cable Size * mm 2 1.5 1.5 1.5 1.5 1.5 1.5
ELECTRICAL DATA
Table B-1 : ( R407C - Cooling Only )
Model 4AC20C 4AC25C 4AC30C 4AC40C 4AC50C 4AC60C
Power supply V-ph-Hz 230 / 1 / 50 400 / 3 / 50
Voltage range V 220 - 240 380 - 415
Nominal Power Input kW 2.62 2.96 3.69 4.94 5.97 6.88
Nominal Current Input A 12.70 13.59 17.48 9.29 10.22 12.93
Maximum Continuous Current A 18.3 23 27 14 14 17
Full Load Current (FLA) A 14 17.5 22.5 12.4 11.8 14.3
Locked Rotor Current (LRA) A 57 82 114 65.5 74 101
Pump Power Input W 183 189 199 320 345 349
Cooling / Heat Pump
RECOMMENDED FUSE AND CABLE SIZES
IMPORTANT :
* The figures shown in the table are for information purpose only. They should be checked and selected to comply with
the local/national codes of regulations. This is also subjected to the type of installation and conductors used.
** The appropriate voltage range should be checked with label data on the unit.
! !
! !
!
CAUTION
• All field wiring must be installed in accordance with the national wiring regulation.
• All the terminals and connections must be tightened. Improper connection and fastenings could cause electric shock, short
circuit and fire.
• Ensure that the rated voltage of the unit corresponds to that of the name plate before commencing wiring work according to
the wiring diagram.
• The unit must be GROUNDED to prevent possible hazards due to insulation failure.
• All electrical wiring must not touch the refrigerant piping, compressor, pump, fan motor or any moving parts of the fan
motors.
• Do not operate the chiller with wet hands. It would result in electric shock.
• Do not use fuse of different amperage than stated. Using wire etc. to replace a fuse could cause equipment damage or fire.
Table B-2 : ( R22 - Cooling Only )
Model AC20C AC25C AC30C AC40C AC50C AC60C
Power supply V-ph-Hz 230 / 1 / 50 400 / 3 / 50
Voltage range V 220 - 240 380 - 415
Nominal Power Input kW 2.68 2.74 3.50 4.50 5.26 6.38
Nominal Current Input A 12.64 12.11 16.70 8.80 9.30 12.32
Maximum Continuous Current A 18.3 23 27 14 14 17
Full Load Current (FLA) A 14 16.5 21.4 10.5 11.3 12.3
Locked Rotor Current (LRA) A 57 82 114 65.5 74 101
Pump Power Input W 175 190 201 320 345 351
Table B-3 : ( R407C - Heatpump )
Model 4AC20CR 4AC25CR 4AC30CR 4AC40CR 4AC50CR 4AC60CR
Power supply V-ph-Hz 230 / 1 / 50 400 / 3 / 50
Voltage range V 220 - 240 380 - 415
Nominal Power Input (Cooling/Heating) kW 2.61/2.69 3.09/2.75 3.82/4.00 4.85/5.01 5.47/5.66 6.53/6.28
Nominal Current Input (Cooling/Heating) A 12.69/12.99 14.3/14.1 19.29/20.19 9.13/9.23 9.59/9.96 12.77/12.67
Maximum Continuous Current A 18.3 23 27 14 14 17
Full Load Current (FLA) A 14 17.5 22.5 12.4 11.8 14.3
Locked Rotor Current (LRA) A 57 82 114 65.5 74 101
Pump Power Input (Cooling/Heating) W 173/181 186/195 194/214 320/334 336/347 347/358
Table B-4 : ( R22 - Heatpump )
Model AC20CR AC25CR AC30CR AC40CR AC50CR AC60CR
Power supply V-ph-Hz 230 / 1 / 50 400 / 3 / 50
Voltage range V 220 - 240 380 - 415
Nominal Power Input (Cooling/Heating) kW 2.61/2.70 2.95/2.83 3.55/3.56 4.59/4.65 5.07/5.01 6.57/6.26
Nominal Current Input (Cooling/Heating) A 12.38/12.73 13.4/12.8 18.24/18.37 8.67/8.78 8.99/8.95 13.49/13.03
Maximum Continuous Current A 18.3 23 27 14 14 17
Full Load Current (FLA) A 14 16.5 21.4 10.5 11.3 12.3
Locked Rotor Current (LRA) A 57 82 114 65.5 74 101
Pump Power Input (Cooling / Heating) W 175/186 189/194 201/211 320/329 336/349 351/357