Ascon tecnologic B05B, Руководство по эксплуатации

Страница: 1 / 24

Ascon Tecnologic - B05B - OPERATING INSTRUCTIONS - PAG. 1
B05B
DIGITAL ELECTRONIC
TEMPERATURE CONTROLLER
WITH DEFROSTING FUNCTION
OPERATING INSTRUCTIONS
22/01 - Code: ISTR_M_B05B_E_03_--
ASCON TECNOLOGIC S.rl.
Viale Indipendenza 56, 27029 - VIGEVANO (PV) ITALY
Tel.: +39 0381 69871 - Fax: +39 0381 698730
http:\\www.ascontecnologic.com
info@ascontecnologic.com
PREFACE
D
This manual contains the information necessary for
the product to be installed correctly and also instruc-
tions for its maintenance and use; we therefore recom-
mend that the utmost attention is paid to the following
instructions and to save it
This document is the exclusive property of Ascon Tecnologic
S.rl. which forbids any reproduction and divulgation, even
partially, of the document, unless expressly authorized.
Ascon Tecnologic S.rl. reserves the right to make any formal
or functional changes at any moment and without any notice.
Ascon Tecnologic S.rl. and its legal representatives do not
assume any responsibility for any damage to people, things
or animals deriving from violation, wrong or improper use or
in any case not in compliance with the instrument features.
D Whenever a failure or a malfunction of the device
may cause dangerous situations for persons, thing
or animals, please remember that the plant has to be
equipped with additional electromechanical devices
which will guarantee safety.
1. INSTRUMENT DESCRIPTION
1.1 General description
The controller
B05B
(Supply and control unit) connected to the
P03CB
or
P34B
Display unit is a
digital controller system
with microprocessor that is typically
used
in
cooling applica-
tions
that have
ON/OFF temperature control
and
defrost
control
at
time intervals
, by
reaching the temperature
or
continuous time compressor operating
through s
topping
the compressor
,
electric heating
or
hot gas/cycle inversion
.
The appliance has
special defrosting optimisation func-
tions
and
other functions
to
reduce the amount of en-
ergy used
by the controlled system.
The system can
have up to 4 relay outputs
and
up to
5 inputs
,
3
configurable
for NTC
temperature
probes
, and
Index
1. Instrument description ............................................... 1
1.1 General description ........................................................... 1
1.2 HMI front panel description ............................................... 2
1.3 B05B Control Unit description ........................................... 3
2. Programming ............................................................... 3
2.1 Fast programming of “Normal” Set Point ........................... 3
2.2 Standard mode parameters programming ........................ 3
2.3 Parameter protection using the password ......................... 4
2.4 Customized mode parameter programming
(parameters programming level) ....................................... 4
2.5 Reset parameters to default value .................................... 4
2.6 Keyboard lock function ...................................................... 4
2.7 Variables display ............................................................... 5
3. Usage warnings ........................................................... 5
3.1 Admitted use ..................................................................... 5
4. Installation warnings ................................................... 5
4.1 Mechanical mounting [mm] ............................................... 5
4.2 Mechanical dimensions ..................................................... 6
4.3 Electrical connections ....................................................... 6
5. Functions ..................................................................... 7
5.1 ON/Stand-by function ........................................................ 7
5.2 Normal, Economic and Turbo operation ............................ 7
5.3 Measure and display configuration ................................... 8
5.4 Digital input configuration .................................................. 9
5.5 Outputs and Buzzer configuration ..................................... 9
5.6 Temperature control ........................................................ 10
5.7 Compressor protection functions and power-on delay .... 11
5.8 Defrost control ................................................................. 11
5.9 Evaporator fans control ................................................... 13
5.10 Alarm functions ............................................................... 14
5.11 Function of keys
/
and
/ ................................ 15
6. Accessories ............................................................... 16
6.1 Parameters configuration by “A01” .................................. 16
6.2 TVR Y remote display ..................................................... 16
6.3 ARS1 Serial Interface ..................................................... 16
7. Programmable parameters table .............................. 17
8. Problems and maintenance ...................................... 22
8.1 Notifications .................................................................... 22
8.2 Cleaning .......................................................................... 22
8.3 Disposal .......................................................................... 22
9. Warranty and Repairs ............................................... 22
10. Technical data ............................................................ 22
10.1 Electrical characteristics ................................................. 22
10.2 Mechanical characteristics .............................................. 22
10.3 Functional features ......................................................... 23
11. Instrument Ordering Code ........................................ 23
11.1 B05B Instrument Code.................................................... 23
11.2 P03CB Display Unit Code ............................................... 23
11.3 P34B Display Unit Code ................................................. 23