ASCOM Eurit 25, Руководство пользователя

Страница: 14 / 105

10 10 10 10 10
20323163en_ba_a0
Startup
Connecting the phone Connecting the phone Connecting the phone Connecting the phone Connecting the phone
Plug the smaller of the two connectors on the
telephone connection cord into the socket on the
phone base (1) marked with the phone symbol.
Press the cable into the cable duct (2). To do this,
use a flat, thin object to press the cord under the
grips.
Turn the phone over again and set it on its feet. Lift
the handset.
Plug the larger connector at the other end of the
telephone connection cord into the wall socket (3)
or NT+2ab.
The display shows “Please enter at least one MSN
(subscriber number) with name>OK<”. To set up
multiple subscriber numbers or MSNs, refer to the
section on “Setting up Multiple Subscriber
Numbers (MSN)”.
Lift the handset. You will hear the dialling tone. Now you can start telephoning!
➭
Make sure the telephone connection cord is safely stowed to prevent tripping on it.
➭
Do not plug the connection cord in sockets other than the one for which it is intended.
Write-on label Write-on label Write-on label Write-on label Write-on label
The phone is delivered with the write-on label already
inserted.
The last page of this user manual contains additional labels
for the speed dial keys. Cut a new label out whenever you
need one.
Insert the cut-out label into the recess near the speed dial
keys (1). If you already know which numbers are to be
assigned to these keys, you can complete the label now.
Place the Perspex cover on the label field into the recess (2)
and press lightly until it fits into position.
➭
If you want to add other numbers or do not know at startup which numbers you will be
using, you can easily remove the Perspex cover for subsequent modification. Lift the cover
by placing a fingernail under the notch at its edge. Add the number(s) and replace the
cover as described above.
2
1