ASCOM DIGISTAT, Руководство пользователя

Страница: 19 / 49

DIG UD IMB IU 0005 ENG V01
Page 19 of 49
Fig 20 - Device selection screen
In the example shown in the figure only one device is available.

Click the name of the wanted device. The name is this way highlighted.

Click the Ok button on the command bar (Fig 20 B ).
The system will go back to the “acquisition screen” (Fig 17). The wanted device will be selected.

The Setup button makes it possible to access the acquisition devices configuration
functions.
Click the button to display the specific device configuration window. The kind and the functions of
the configuration window depend on the specific device selected. Fig 21 shows an example.