TD 92333GB
2007-02-07/ Ver. D
User Manual
9d24 Mkll Cordless Telephone
43
Navigation key
and step to “Information”. Press Navigation key to view
information about:
• IPDI: The unique global GAP identity number for the SIM card.
• IPEI: The unique global GAP identity number for the handset.
• SW version: Here you can see which version of the handset software you have.
• AP SW version: The Alarm Module software. If the Alarm Module is not connected, it
will be indicated with NC (Not Connected).
Tip
: There is a quick access code you can use to enter the information mode directly
without using the menu. The quick access code is #46#.
9
Advanced Functions
9.1
System Handling
The 9d System supports the GAP (Generic Access Profile) standard. This makes it possible
to log on to any GAP compatible system with your handset.
9.1.1
Register a New PBX System
You can register up to four different PBX systems on your handset. To register you have to
enter the authentication code related to the system you are logging on to.
Note:
To avoid deleting a registered system accidentally, a parameter can be set in the SIM
card that makes it impossible for the normal user to delete a system.
When you have registered more than one system, you can manually select which system
to connect to, see
Register
1
Enter registration mode.
Enter the menu and press Navigation key or to select the Settings tab
and press the Navigation key
to enter “Settings”. Press Navigation key
, step
to “System” and press Navigation key . Select “Register” and press Navigation
key . Step to the next available PBX system, system A, B, C or D and press “New”.
Tip
: There is a quick access code you can use to enter the register mode directly
without using the menu. The quick access code is #73#.
2
Press "C" to delete the default name. Use the Alpha Numeric Keys to write a name,
maximum 12 letters. Press "Ok".
Or press "Ok" to accept the default name.
3
The IPDI code is displayed. The GAP identity number for the SIM card can be
required in some PBXs. Press "Ok".
4
“Park:” is displayed. The PBX Park number is only needed if it is difficult to register
to a specific PBX when you have several PBXs. Press “Ok”.
5
Enter the authentication code related to the new PBX system and press “Ok”.
“Searching” is displayed. If the handset has found the new system “Registering
OK” is displayed. If the handset fail to find the new system "Registering fail" is
displayed.
