
ASCO CARBON DIOXIDE LTD
Offi cial sales partner USA
Industriestr. 2, CH-8590 Romanshorn
GRAND NORTHERN PRODUCTS
Tel. +41 71 466 80 80 Fax + 41 71 466 80 66
Tel. + 001 616 583 50 00 Fax + 001 616 583 90 61
/www.ascoco2.com
[email protected]/www.grandnorthern.com
ASCO
CARBON DIOXIDE LTD
8
1
TECHNICAL SPECIFICATION
lowed during set-up, operation and servicing. Therefore it is of utmost importance that
it is read by the assembly technician before installation and start-up as well as by the
specialist/operator in charge. It must always be within reach where the
ASCOJET
is
being used.
NOTE
The machine is used to remove contamination by using dry ice pellets. The ma-
chine should not be operated in explosive environments.
Use only dry ice pellets as blasting medium. Using any other blasting medium
can cause damage to the machine.
1.7.1 Identifi cation of signs and symbols in the technical manual
The safety tips contained in this technical manual, whose disregard could endanger
people and machines, are indicated by a general danger sign and the additional mar-
kings
DANGER
!
WARNING
! and
ATTENTION
!
The following points must be followed step-by-step to ensure safe operation.
DANGER
Risk of CO
2
suffocation due to carbon dioxide.
WARNING
Electric shock hazard.
CAUTION
Risk of injury due to low temperatures. Dry ice has a temperature of -110.2 °F
(-79 °C). Direct contact with the skin can cause frost burns.