Ascent AT5200 FTTX EDFA, Краткое руководство пользователя

Страница: 16 / 29

AT5200 FTTX Multiport EDFA
Solutions Provider for FTTx, RFoG, and HFC www.ascentcomtec.com Page 16 of 29
I. Each Output
Read-only menu, tells the each output of EDFA in dBm.
J. PA Current
Read-only menu, tells the pre pump current of EDFA
K. PA Temp
Read-only menu, tells the pre pump temperature of EDFA
L. BA Current
Read-only menu, display the multi-mode amplify current of EDFA
M. Unit Temp
Read-only menu, tells the case temperature
N. Power1
Read-only menu, tells the status of power1
O. Power2
Read-only menu, tells the status of power2
P. IP
Adjustable list, display the IP address
Q. SUB
Adjustable list, display the address of net mask
R. GW
Adjustable list, display the gateway address
S. TR1
Adjustable list, display the TRAP1 address
T. TR2
Adjustable list, display the TRAP2 address
U. LCD Contrast Level
Adjustable list, display the LCD contrast level adjustment
Assistant manual
1. OP Route Select (Set the optical route)
Select the menu that need modification, press

button enter into sub menu, then
press

button enter into menu modify status, press

\

button to select the optical route
mode, and at last press

button to save, and

press button back to main menu.
2. Op Switch Point (Set the switching point of optical switch)
Select the menu that need modification, press

button enter into sub menu, then press

button enter into menu modify status, press
▲
/
▼
button to increase and decrease the
value, at last press

button to save, and press

button back to main menu.