IRD1516 Tuner/ASI to IP Gateway
Solutions Provider for FTTx, RFoG and HFC www.ascentcomtec.com
Page 8 of 31
When users open the package of the device, it is necessary to check items according to
packing list. Normally it should include the following items:
IRD1516 Tuner to IP Gateway
User’s Manual
Grounding Cable
RF In and Loop Out Cable
Power Cord
If any item is missing or mismatching with the list above, please contact local dealer.
When users install device, please follow the below steps. The details of installation will be
described at the rest part of this chapter. Users can also refer rear panel chart during the
installation.
The main content of this chapter including:
Checking the possible device missing or damage during the transportation
Preparing relevant environment for installation
Installing gateway
Connecting signal cables
Connecting communication port (if it is necessary)
Connecting
Grouding
Wire and
Power
Cord
Acquisition
Check
Fixing
Device
Setting
Parameter
Running
Device
Connecting
Signal Wire
Item
Requirement
Machine Hall Space
When user installs machine frame array in one machine hall, the distance
between 2 rows of machine frames should be 1.2 to 1.5m and the distance
against wall should be no less than 0.8m.
Machine Hall Floor
Electric isolation, dust-free
Volume resistivity of ground anti-static material: 1×10
7
Ω
to 1×10
10
Ω,
Grounding current limiting resistance: 1 M (Floor bearing should be greater than
450 kg/m
2
)
