Ascendo ZF-3, Руководство пользователя

Страница: 9 / 14

The high- and low-frequency unit can be connected as follows:
• single-wired:
- one cable-pair from power-amp to high-frequency unit
- one cable-pair from low-frequency unit to high-frequency unit
- one cable-pair from inner chassis to outer chassis
• bi-wired:
Version1:
- one cable pair from power amp to low-frequency unit
- one cable pair from the power amp to high-frequency unit
- one cable pair from inner chassis to outer chassis
Version2:
- one cable pair from power amp to inner chassis
- one cable pair from the power amp to high-frequency unit
- one cable pair from high-frequency-unit to outer chassis
• tri-wired:
- one cable pair from power amp to outer chassis
- one cable pair from the power amp to inner chassis
- one cable pair from the power amp to high-frequency unit.
• bi-amped:
Version1:
- one cable-pair from separate amps for low- and high-frequency unit
- one cable-pair from inner chassis to outer chassis
Version2:
- one cable-pair from two separate amps for inner chassis and high-
frequency unit
- one cable-pair from high-frequency unit to outer chassis
• tri-amped:
-
one cable-pair from three separate amps to inner chassis, outer chassis and
high-frequency unit.
Take care of connecting always the plus (red) terminal of your power amp with the
plus (6 / red) terminal of the speaker!
Take care not to connect a plus with a minus pin of your cable!
9