Ascaso BARISTA T 1GR, Руководство пользователя, Страница: 9 / 56

9
ENGLISH
4 - Characteristics of the machine
The machines of the BARISTA T series have been designed to prepare espresso and
hot drinks.
The operating principle consists of a volumetric pump inside the machine that feeds
the hot water and steam boiler, in addition to the independent coffee groups. By
activating the controls, the water is sent to the external brewing units in the form of hot
water or steam according to the needs.
The water to be used to prepare the drinks is taken at the moment of the water network,
pressurized by the pump, passing through a pre-heating circuit through the hot water /
steam boiler, and its temperature is finally raised from the temperature from pre-heating
to working by a heat exchanger.
Each one of the spreader groups, as well as the hot water / steam boiler, can present
a different working temperature, as well as different independent configuration
parameters to optimize the machine’s performance before the needs of the user.
The machine is formed by a supporting structure in steel to which the mechanical and
electrical components are fixed. The productive operations are carried out on the front
of the machine and the controls, the control devices and the coffee brewing groups are
located. In the upper part of the machine there is a surface destined to heat the cups.
BARISTA T PLUS/ONE BARISTA T 1GR BARISTA T 2GR BARISTA T 3GR
Voltage 380V 3F
Power (w) 3500 5500 6500
Steam boiler (w) 2000 3500 3500
Coffee group (w) 1x1000 2x1000 3x1000
Steam boiler
Max. Pressure (mpa) 0,27 0,27 0,27
Working pressure (mpa) 0,18 0,18 0,18
Volume (l) 4,5 8,5 8,5
Size (mm) 440x550x465 700x550x465 920x550x465
Weight (kg) 52 65 85
Water inlet 3/8" 3/8" 3/8"
Min/max pressure (mpa) 0,1 / 0,6 0,1 / 0,6 0,1 / 0,6
Drain pipe diameter (mm) 16
1 Coffee filter holder 1
2 Coffee filter holder 1 2 3
Blind filter 1
Tamper 1
Drain pipe 1
Incoming water pipe 1
MANUAL BARISTA T ENG-ESP_DE-----actualizado marzo2019.indd 9 25/03/2019 15:37:05