Ascale AS?2124, Руководство пользователя

Страница: 5 / 10

5
3. 5V DC power jack
4. Plug in one DVI Y-cable here and connect 1
st
and 2
nd
DVI sources.
5. Rotary switch. For detailed setup, please see the next section.
6. LED indicator (EDID)
7. Power indicator
8. IR receiver
DIP Switch
When the remote control is not available, the switcher can also be configured by DIP
switch shown as the following:
*Please always set DIP Switch 1 at ON.
*When you need to configure the device by DIP Switch, Set DIP Switch 2 at ON. Set DIP
Switch at OFF only when you need to control the device by remote control.
Dip Switch 3 On 3 Off
4 On Output 4 Output 3
4 Off Output 2 Output 1
Table 1
3
4
5 6 7
8
Fig.1 Fig.2