Setting Device, Group, and Port Security
Page 3-23
Port Security
To set port security:
1
Select the port for which security is to be set by click-
ing on it once on the front panel image.
2
Click
Security
.
The Port Security table appears, similar to Figure 3-19.
Figure 3-19
Port Security table
3
Open the
Security Status
drop-down menu and select
On
.
This sets security for the port; any node that is heard on
the port, which is not allowed on this port, will cause
the action specified in the
Sec Violation Action
menu.
4
Open the
Sec Violation Action
menu and select the
action to occur if an unauthorized node attempts to
access the port.
See “Security” on page 4-11 for a description of each vio-
lation action.
5
Click
Apply
.
Security for the port is configured.
Click
Refresh
to view updated information.
Bay PM book Page 23 Wednesday, August 27, 1997 1:23 PM
